Please to watch the video.
MagiX 35 DS
DP = Discontinued product - only spare parts available
Compact double scissor lift that needs no compressed air or a safety catch. Synchronisation is controlled electronically via a photocell, without a predefined drive-up direction and thus flexible in positioning.
Description
- Double master / slave system, therefore no compressed air and no safety ratchet necessary
- Self-locking parachute valves in cylinders against sudden increase of speed
- Control column with push buttons, integrated pump unit and alarm signal
- Electronic synchronization through photo sensor and reflector, stops lift from 50 mm difference in height
- Emergency lowering valves can manually be opened
- Sturdy scissor construction for high directional stability
- Ramps made of tear plates, for easy drive-on, also with wet wheels
- Base frame galvanized as standard
- No mechanical connection between scissor sections, therefore free gangway
- Lubrication free teflon sliding bearings in all joints
- Optimum lifting area from small passenger car up to VW T6 short wheel base / BMW series 7 long (G12)
- Low minimum height ≤ 100 mm, for perfect drive-over situation, also for flat vehicles
- No fixed drive-on direction, lift is reversible, flexible positioning of control column. Recommended: front left side
- Rubber blocks 1 set = 4 pcs, H=40 mm, as well as hose and calbe covers included in scope of delivery
Standard colours:
Platforms & scissor: RAL 7016 – grey
Ramps: RAL 3020 – red
Versions
- Available with different voltages
- For surface-mounting or recession, with the same lift version
- G = galvanized platforms
Options
- Set of expansion bolts
- LED-lighting set for surface-mounted installation
- Installation frame galvanized, for recessed installation
- Set rubber blocks, 20, 40, 60, 70, 80 and 100 mm
- Hose extensions incl. covers (+ 2 meter)
- Additional long drive-over ramps 1 set = 4 pcs, L=XXXX mm, for lowered cars
- Cross bar for lifting 4x4 vehicles
- Special colours available on request!
Request for quotation
Technical data
| Lifting capacity, up to | 3,500 kg |
| Stroke length | 1,900 mm |
| Working height | 2,000 mm / 1,900 mm + Rubber pads |
| Lifting / lowering time | ~ 40/38 sec. |
| Pump unit | 2.2 kW |
| Voltage | 3Ph - 230/400V - 50/60 Hz |
| Recommended distance scissor – control column | 2 m |
Scissor platforms
| Platform length | 1,480 - 2,200 mm |
| Platform width - Measurements depend on platform length | 625 mm |
| Min. height | ≤100 mm / 0 mm |
| Distance between platforms | flexible, 900 mm (recommended) |
| Depth of recess | 0 mm/105 mm |