Maestro 4.50 F
Electro-mechanical 2x2-post lift, 5 t capacity
Description
Posts:
- Asymmetric post installation, vehicles can be positioned in rear area of work bay, for better door-opening angle
- Very stable bent posts
- Without base frame, therefore free drive-in situation
- Two strong electric motors
- Cold-rolled spindles for a long service life
- Nylon nut sets for high durability
- Long carriage with optimized mounting of 8 sliding blocks for low friction
- Carriage with threaded holes for easy adoption of diverse superstructures
- Door-stop mounted on carriage
- Obstruction system for stopping the lift when it hits an obstracle
- Pushbutton control unit with alarm signal
- Programmable limit switch for top stop and CE-stop
- Electronic synchronization through comparison of pulses measured on the pulleys
Arms:
- Universal lifting area from small passenger car up to VW T6 long wheel base with lifting pad type "F"
- Low minimum height
Standard colours:
- Carriage and arms: RAL 3020 – red
- Posts: RAL 7016 – grey
Versions
- Double joint arms
- External arm locking system
- F = flex pad
Options
- Available with different portal heights, alternatively inground kit
- Set of expansion bolts
- LED-lighting set, flexible with spiral cable, fastening through magnets on posts or vehicle
- Large program of extra pads, depending on type of vehicle
Special colours available on request!
Request for quotation
Technical data
| Lifting capacity, up to | 5,000 kg |
| Stroke length | 1,900 mm |
| Working height | 1,955-2,035 mm |
| Cylinder diametre | |
| Lifting / lowering time | ~ 35 sec. |
| Voltage | 3 x 230 / 400V – 50 Hz – 20 A |
| Motor | 4 x 3.6 kW |
| Lifting pad included in the delivery | F: 11027: 95-135 mm |
| Total height incl. portal | 4,060-4,420 mm |
| Drive-through width | 3,212 mm |
| Min. height | 95 mm |
| Width between posts | 3,553 mm |
| Total width - outer edges base plates | 4,320 mm mm |
| Arm length, min. - max. | 1,241- 1,651 mm |
| Insertion height in swivel arm | F Std: 65 mm F Premium: 53 mm |