What's underneath should excite you just as much as what's on it.
Masterlift 2.35 NxT Saav VAN
The double telescopic swivel arms convince with an unconventional lifting area, especially suitable for off-road vehicles and vans.
The superstructure is easily adjustable by means of a ball-bearing mounted sliding part on a cross-beam, for maximum flexibility.
The internal arm locking system installed as standard reliably protects against external influences.
The strong 140 mm diameter cylinders are also designed for long-lasting functionality and further round off the high quality level, which ensures low maintenance requirements.
Even in the event of a power blackout, the lift can still be lowered without any problems thanks to the pneumatic emergency lowering system.
The Masterlift 2.35 NxT Saav VAN is perfectly completed by a control system that is both visually and technically convincing.
Benefits
Frame and sub-casing
The hot-dip galvanized frame for the clamping system of the new guide is bolted to the sub-casing, assembled at the factory. The clamping frame can also be used without the sub-casing for various installation variants like ceiling installation.
Aluminium guide
The guide is made of anodized aluminium and is therefore optimally protected against wear and corrosion, and is clamped into the frame. The head plate can be adjusted, if necessary, which facilitates installation in third-party cassettes.
NxT Inversed cylinder
The strong, hard-chrome-plated cylinders with a diameter of 140 mm are perfectly suited for increasingly heavy vehicles. With the self-bleeding drive cylinder, the oil volume is only 10 litres per lift.
Cassette cover
The new cassette cover made of an anodised extruded aluminium profile and all-round rubber seal is not only resistant to moisture, but it also safely absorbs the enormous forces that act on the cover during battery removal, for example.
Synchronisation bar
The optimised synchronisation- and safety is ensured by a KTL coated synchronisation bar which can be adapted to varying piston distances via connecting pieces; the new standard is 1550 or 2600 mm.
Self-supporting installation
Stable and slim suspension for self-supporting installation when supporting on the ground of the cassette isn't possible. The suspension can be retrofitted at any time simply by screwing it to the guide tube; ideal for installation in old cassettes.
Programmable push button control unit - for all inground lifts
Programmable push-button control with pneumatic emergency lowering, lifting height and CE stop individually adjustable, error code via signal tone sequence.
Hydraulic pump unit with immersed motor for inground lifts
High-quality hydraulic pump unit with immersed motor, low power consumption, efficient oil filtration and pneumatic emergency drain as standard.
Description
Standard colour:
- Base plate: RAL 7016
- Arms: RAL 3020 - optionally with KTL coating
Frame:
- Standard: completely hot-dip galvanized
Sub-casing:
- Standard: painted
- Optional: hot-dip galvanized or plastic coated
Versions
- Self-supporting design, without load on the bottom of the cassette
- Floor-standing design
Installation variants:
- On-floor installation
- Ceiling installation
Options
- Wide range of extra pads, depending on vehicle type
- Wheel support devices
- Active cassette ventilation
- Moisture monitoring in the steel cassette
- Special colours
Recommendations
| Mercedes-Benz |
Technical data
| Lifting capacity, up to | 3,500 kg |
| Stroke length | 1,915 mm |
| Working height | Sport: 1,993 - 2,025 mm Universal: 2,010 - 2,089 mm |
| Cylinder diametre | 2 x 140 mm |
| Distance between cylinders | 1,550 mm |
| Lifting / lowering time | ~ 30 sec. |
| Foundation depth | 2,640 mm mm |
| Pump unit | 3 kW |
| Hydraulic oil | 10 l |
| Voltage | 230/400 V / 50 Hz / 16 A |
Arm superstructure
| Total width | 3160 mm |
| Lifting pad included in the delivery | Uni: 16007 I 95 - 174 mm Sport: 16006 I 78 - 110 mm |
| Min. height | Uni: 95 - 174 mmSport: 78 - 110 mm+ 50 mm height extension |
| Arm length, min. - max. | 710 - 1,443 mm |
| Insertion height in swivel arm | 55 mm |