slide 1 to 5 of 5
Maestro 35
Electro-mechanical 2-post lift, 3.5 t capacity
Benefits
slide 1 to 3 of 8
The cold-rolled spindle
The cold-rolled spindle in combination with the nylon nut ensures maximum safety and long service life.
Strong internal arm locking system
Strong, internal swivel arm locking system protects against dirt and moisture and thus offers high functional safety.
Safety system
A safety system ensures that the lift stops automatically when lowered onto an obstacle.
Description
Also suitable for the safe lifting of electric vehicles
- Asymmetric post installation
- Very stable bent posts
- Made of high quality 8 mm steel
- Without base frame
- Two motors
- Cold-rolled spindle
- Nylon nut sets
- Carriage with a combination of bearing by sliding blocs and rollers
- Pushbutton control unit with alarm signal
- Programmable top stop
- Electronic synchronization
- Front arms double and rear arms simple telescopic
- Possibility of parallel parking of arms
- Internal arm locking system
- Low minimum height
Standard colours:
- Arms: red RAL 3020 / posts: grey RAL 7016
Versions
- Available with 400 V / 3 phase, 50 cycles
- F = flex pad
- CF = combiflex pad
- CF-08 = combiflex 08 pad
- DT/ST = double telescopic short arms, single telescopic long arms
Options
- Available with 2 different portal heights; alternatively in-ground kit
- LED lighting set
- Power pack
- Set of expansion bolts
- Extra control unit
- A large program of U and flex pads
- Special colours available on request
Request for quotation
Recommendations
| Volkswagen |
Technical data
| Lifting capacity, up to | 3,500 kg |
| Stroke length | 1,900 mm |
| Working height | 1,995 - 2,025 mm |
| Lifting / lowering time | ~ 40 sec. |
| Voltage | 3x400V-50Hz-25A |
| Motor | 2 x 2.8 kW |
Arm superstructure
| Total height post | 2706 mm |
| Total height incl. portal | 4,350 mm |
| Drive-through width | 2,290 mm |
| Min. height | 95 mm |
| Width between posts | 2,565 mm |
| Total width - outer edges base plates | 3,320 mm |
| Total width - outer edges posts | 3,075 mm |
| Arm length front, min. - max. | F DT: 600-1,220 mm |
| Arm length rear, min. - max. | F ST: 900-1,425 mm |