Please to watch the video.
Sharklift 4.65 F 480/550 (KA1550/3000)
Electro-hydraulic 4-ram lift, 6.5 t, with platforms
High-precision wheel alignment lift with guaranteed accuracy tolerances of +/- 0,5 mm in transverse and longitudinal direction, can be combined with various wheel aligners, recommended by leading car manufacturers.
Benefits
Platform structure for 4-ram lifts
High-precision platforms with zinc coated functional surfacesd, distance pieces and sliding plates are fixed by toothed rails made of stainless steel. Can be combined with various wheel aligners.
Inversed cylinder - for all inground lifts
Hard-chrome plated inversed cylinder with precisely fitting piston guidance via sliding bands, small amount of environmentally friendly hydraulic fluid, almost maintenance-free.
Programmable push button control - Additional features for for 4-ram lifts
Additional functions for push button control unit for 4-ram lift: synchronisation control between the lifting units, 3 adjustable height positions, level control for wheel alignment.
Air supply for scissor jacks (patented)
Space-saving and extremely low-wear scissor jack with low overall height, without "knotted" spiral hose, easy to maintain and usable for any platform length.
High precision sliding plates for OEM wheel alignment lifts
High-precision and smooth moving sliding plates for OEM wheel alignment platforms, with non-skid coating; base plate fixed via toothed list and brush seal to protect against moisture and dirt.
Steel cassette
Liquid-tight steel cassette with tightness certificate in many versions for special installation situations; pre-fitting of the lifting unit ex works as optional extra.
Programmable push button control unit - for all inground lifts
Programmable push-button control with pneumatic emergency lowering, lifting height and CE stop individually adjustable, error code via signal tone sequence.
Description
Steel cassette:
- Waterproof steel cassette
Hydraulic unit:
- 2 separate hydraulic units with
- hard-chrome plated cylinders
- Electronic synchronization between the hydraulic units and pre-programmed top stop
- Flexible synchronization and safety system
- Corrosion-free guiding elements
- Hydraulic pump unit with immersed motor
- Ecological hydraulic fluid
- Pneumatic emergency lowering
- Programmable pushbutton control unit
- Air preparation unit for oiled and regulated compressed air ( min . 6 bar / max . 10 bar )
Platforms:
- A set of platforms with drive-on ramps and stops
- Platforms with tolerances of only max ± 0,5 mm length- and crosswise
- With two recesses front and rear, as well as distance pieces covering the entire length and fixated by steel edges in sides
- Prepared for the new innovative air connection kit
- All surfaces zinc-coated as standard
Standard colours:
- Platforms: RAL 7016
- Ramps: RAL 3020
Versions
Steel cassette:
- Hot galvanized
- Coated
Installation:
- Superstructure on floor
- Superstructure in floor, with or without flush-floor device
- Contact us with regard to the possibilities of combining with other wheel alignment equipment
Options
- LED lighting set
- Precision slip plates
- Scissor jack
- Zink coating and special colours on request
Recommendations
| Mercedes-Benz |
| Volkswagen Group |
Technical data
| Lifting capacity, up to | 6,500 kg |
| Stroke length | 1,865 mm |
| Working height | 2,060 mm |
| Cylinder diametre | 4 x 213 mm |
| Distance between cylinders | 1.550 / 3.000 mm |
| Lifting / lowering time | ~ 35 sec. |
| Foundation depth | 2,625 mm |
| Pump unit | 2 x 3.0 kW |
| Hydraulic oil | 18 l |
| Voltage | 230/400 V / 50 Hz / 16 A |
Platforms
| Platform width - Measurements depend on platform length | 650 mm |
| Usable length of platform | F480: 4,800 mm F550: 5,500 mm |
| Wheel base, min. - max. | F480: 4,150 mm F550: 4,850 mm |
| Distance between platforms | 900 mm |
| Drive-on height | 195 mm |
Scissor jack
| Lifting capacity, up to | 2,600 kg |
| Height | 250 mm |
| Operation | air hydraulic |
| Lift positions | Middle / 790 - 1,460 mm |