Maestro 30
DP = Discontinued product - only spare parts available
Description
- Asymmetric post installation
- Very stable bent posts
- Without base frame
- Two motors
- Cold-rolled spindle
- Nylon nut sets
- Carriage with slide blocks
- Pushbutton control unit with alarm signal
- Programmable top stop
- Electronic synchronization
- Single telescopic front and rear arms, as standard
- Possibility of parallel parking of arms
- Internal arm locking system
- Low minimum height
Standard colours:
- Arms: red RAL 3020 / posts: grey RAL 7016
Versions
- Available with different voltages
- F = flex pad
- CF = combiflex pad
- CF-08 = combiflex 08 pad
- DT/- = double telescopic short arms, single telescopic long arms
Options
- Available with 2 different portal heights; alternatively in-ground kit
- LED lighting set
- Power pack
- Set of expansion bolts
- Extra control unit
- A large program of U and flex pads
- Special colours available on request
Request for quotation
Technical data
Lifting capacity, up to | 3,000 kg |
Stroke length | 1,900 mm |
Working height | 1,995 - 2,025 mm |
Lifting / lowering time | ~ 40 sec. |
Voltage | 3x230/400 V-50Hz - 25/16 A |
Motor | 2 x 2.8 kW |
Arm superstructure
Total height post | 2706 mm |
Total height incl. portal | 4,050 / 4,350 mm |
Drive-through width | 2,110-2,310 mm |
Min. height | 95 mm |
Width between posts | 2,365-2,565 mm |
Total width - outer edges base plates | 3,120-3,320 mm |
Total width - outer edges posts | 2875-3075 mm |
Arm length front, min. - max. | F Std: 540 - 850 mm F DT: 480 - 840 mm |
Arm length rear, min. - max. | 900 - 1,425 mm |