Benefits
Frame and sub-casing
The hot-dip galvanized frame for the clamping system of the new guide is bolted to the sub-casing, assembled at the factory. The clamping frame can also be used without the sub-casing for various installation variants like ceiling installation.
Aluminium guide
The guide is made of anodized aluminium and is therefore optimally protected against wear and corrosion, and is clamped into the frame. The head plate can be adjusted, if necessary, which facilitates installation in third-party cassettes.
NxT Inversed cylinder
The strong, hard-chrome-plated cylinders with a diameter of 140 mm are perfectly suited for increasingly heavy vehicles. With the self-bleeding drive cylinder, the oil volume is only 10 litres per lift.
Cassette cover
The new cassette cover made of an anodised extruded aluminium profile and all-round rubber seal is not only resistant to moisture, but it also safely absorbs the enormous forces that act on the cover during battery removal, for example.
Synchronisation bar
The optimised synchronisation- and safety is ensured by a KTL coated synchronisation bar which can be adapted to varying piston distances via connecting pieces; the new standard is 1550 or 2600 mm.
Self-supporting installation
Stable and slim suspension for self-supporting installation when supporting on the ground of the cassette isn't possible. The suspension can be retrofitted at any time simply by screwing it to the guide tube; ideal for installation in old cassettes.
Toothed rack
The toothed rack is used as an alternative synchronisation and safety element in difficult installation situations, where tube installation instead of cassette is the choice, and also offers flexibility in terms of piston distances.
Programmable push button control unit - for all inground lifts
Programmable push-button control with pneumatic emergency lowering, lifting height and CE stop individually adjustable, error code via signal tone sequence.
Hydraulic pump unit with immersed motor for inground lifts
High-quality hydraulic pump unit with immersed motor, low power consumption, efficient oil filtration and pneumatic emergency drain as standard.
What's underneath should excite you just as much as what's on it.
Masterlift 2.30 NxT Sa Supersport
The single telescopic sport arms impress with an extremely low minimum height, which is particularly an advantage for the safe lifting of flat sports cars.
The internal arm locking system installed as standard reliably protects against external influences.
The strong 140 mm diameter cylinders are also designed for long-lasting functionality and further round off the high quality level, which ensures low maintenance requirements.
Even in the event of a power blackout, the lift can still be lowered without any problems thanks to the pneumatic emergency lowering system.
The Masterlift 2.30 NxT Sa Supersport is perfectly completed by a control system that is both visually and technically convincing.
Description
Standard colour:
- Base plate: RAL 7016
- Arms: RAL 3020 - optionally with KTL coating
Frame:
- Standard: completely hot-dip galvanized
Sub-casing:
- Standard: painted
- Optional: hot-dip galvanized or plastic coated
Versions
- Synchronisation and safety via
- synchronisation bar
- toothed rack
- Self-supporting installation, without load on the bottom of the sub-casing
Installation variants:
- On-floor installation
- Ceiling installation
Options
- Wide range of extra pads, depending on vehicle type
- Special colours on request
Technical data
| Lifting capacity, up to | 3,000 kg |
| Stroke length | 1,915 mm |
| Working height | 1,985 - 2,010 mm |
| Cylinder diametre | 2 x 140 mm |
| Distance between cylinders | 2,600 mm |
| Lifting / lowering time | ~ 30 sec. |
| Foundation depth | 2,640 mm mm |
| Pump unit | 3 kW |
| Hydraulic oil | 10 l |
| Voltage | 230/400 V / 50 Hz / 16 A |
Arm superstructure
| Total width | 3015 mm |
| Lifting pad included in the delivery | 29265 I 70 - 95 mm |
| Drive-through width | 2,455 mm |
| Min. height | 70 - 95 mm + 65 mm height extension |
| Arm length, min. - max. | 760 - 1,252 mm |
| Insertion height in swivel arm | 55 mm |