What‘s underneath should excite you just as much as what‘s on it.
Masterlift 2.35 NxT Check-in Fn:
The Masterlift 2.35 NxT Fn Check-in platform lifts with wheel-free device each consist of two on-floor, particularly flat platforms for direct reception.
The aluminium planking ensures a permanently attractive appearance.
Thanks to the 1550 mm piston distance, the cylinders are centred under the platforms and thus ensure optimum force transmission.
The strong 140 mm diameter cylinders are also designed for long-lasting functionality and further round off the high quality level, which ensures low maintenance requirements.
Even in the event of a power blackout, the lift can still be lowered without any problems thanks to the pneumatic emergency lowering system. The Masterlift 2.35 NxT Fn Check-in is perfectly completed by a control system that is both visually and technically convincing.
Benefits
Hydraulic pump unit with immersed motor for inground lifts
High-quality hydraulic pump unit with immersed motor, low power consumption, efficient oil filtration and pneumatic emergency drain as standard.
Programmable push button control unit - for all inground lifts
Programmable push-button control with pneumatic emergency lowering, lifting height and CE stop individually adjustable, error code via signal tone sequence.
Aluminium guide
The guide is made of anodized aluminium and is therefore optimally protected against wear and corrosion, and is clamped into the frame. The head plate can be adjusted, if necessary, which facilitates installation in third-party cassettes.
Synchronisation bar
The optimised synchronisation- and safety is ensured by a KTL coated synchronisation bar which can be adapted to varying piston distances via connecting pieces; the new standard is 1550 or 2600 mm.
Cassette cover
The new cassette cover made of an anodised extruded aluminium profile and all-round rubber seal is not only resistant to moisture, but it also safely absorbs the enormous forces that act on the cover during battery removal, for example.
Frame and sub-casing
The hot-dip galvanized frame for the clamping system of the new guide is bolted to the sub-casing, assembled at the factory. The clamping frame can also be used without the sub-casing for various installation variants like ceiling installation.
Self-supporting installation
Stable and slim suspension for self-supporting installation when supporting on the ground of the cassette isn't possible. The suspension can be retrofitted at any time simply by screwing it to the guide tube; ideal for installation in old cassettes.
NxT Inversed cylinder
The strong, hard-chrome-plated cylinders with a diameter of 140 mm are perfectly suited for increasingly heavy vehicles. With the self-bleeding drive cylinder, the oil volume is only 10 litres per lift.
Description
Standard colours:
- Platforms: RAL 7016 with aluminium planking
- Wheel-free device: RAL 7016
Frame:
- Standard: completely hot-dip galvanized
Sub-casing:
- Standard: painted
- Optional: hot-dip galvanized or plastic-coated
Versions
Installation variants:
- On-floor installation
- Ceiling installation
- Self-supporting installation, without load on the bottom of the sub-casing
Options
- XY-heads for wheel-free device (Fn)
- Hot-dip galvanisation
Technical data
| Lifting capacity, up to | 3,500 kg |
| Stroke length | 1,915 mm |
| Working height | 2,018 |
| Cylinder diametre | 2 x 140 mm |
| Distance between cylinders | 1,550 mm |
| Lifting / lowering time | ~ 30 sec. |
| Foundation depth | 2,640 mm |
| Pump unit | 3 kW |
| Hydraulic oil | 10 |
| Voltage | 3x230/400V-50 Hz -16 A |
Platforms
| Total length | 5,190 mm |
| Platform width - Measurements depend on platform length | 550 mm |
| Usable length of platform | 4,400 mm |
| Wheel base, min. - max. | 2,400 - 3,300 mm |
| Distance between platforms | 1,010 mm |
| Drive-on height | 103/148 mm |
Wheel-free device
| Total length | 1,400-2,000 mm |
| Total height | 370 mm |
| Drive-on height | 30 mm |
| Lifting / lowering time | ~ 8 sec. |