Testmaster RT 160-2 NxT
Roller brake tester for check-in, repair and maintenance, testing equipment, general inspection
Description
- 2 galvanized roller sets (split version) for suspended installation (mounting frame required for option weighing cells or for retrofit weighing cells)
- Motors with powerful spur gearbox
- 203 mm rollers with welded profile surface
- Roller length 1.000 mm, standard drive on height 40 mm over the drive off side
- Wear resistant and modern electronic strain gauge measuring system
- Sensing rollers 50 mm
- Prepared for weighing device
- Modular system , all roller sets can be extended with options
- Compact electric / switchbox, prepared for upgrade
- Drive-over axle load 16 to
- Brake force 36 kN
- Equipped as standard with drive-off system
- Manual / Automatic mode
- Delayed switch on, start-up monitoring
- Testing program for electronic parking brakes
- Lockable main switch and emergeny stop-switch
- Motor protection switch for short-circuit protection and thermal monitoring
- Optionally with large easily read analogue display or with PC-connection kit and PC software
Versions
- Galvanised roller sets for hanging installation
- 203 mm rollers with welded surface, drive motors with 9 kW
- Electrical / switch box with motor protection , control electronics , lockable main switch and emergeny stop-switch, 20m Precabling
Options
- Analogue brake force indicator with 2x 400 mm clocks
- Digital display LED-D4, PC Software Display Office NxT
- Graphic program and special programs for trucks
- PC connection / ASA Livestream / Minirechner for ASA Livestream (for Germany)
- Mounting frame for option weighing device (also required when retrofitting the weighing device)
- Plastic coated rollers
- Lifting unit for roller set
- Pull-down device
- Second test speed
- Track plate, up to 15 t axle load
- Reverse roller and measuring direction mode
- Automatic all wheel detection (patented)
- Regulated all-wheel drive
- EDOS (Easy drive out system - patented)
- Coverplate for roller
- Remote control
- Pedal force meter
- Weighing device
- Pressure sensors with options
- Pit protection device
- Extended rollers for low-bed trailers 1500mm
Request for quotation
Technical data
| Drive over load | 16,000 kg |
| Brake force | 36 kN |
| Testing speed | 2.6 km/h |
| Drive power of motors | 2 x 9.0 kW |
| Roller diameter | 203 mm |
| Track width | 1,000 mm |
| Test load | at 50% braking 14,4 to |
| Fuse | min. 3 x 50 A inert |
| Power supply | 3 x 400 V, N, PE 50 Hz |
| Display (W x H x D) | 810 x 670 x 70 mm |
| Roller set (W x L x H) | 1,220 x 1,045 x 545 mm |