Testmaster TL60 NxT
Roller test lane for check-in, repair and maintenance, testing equipment, general inspection
Description
- Hot-dip galvanised, enclosed roller set
- Low wear rollers, 203 mm with welded surface
- Track width: 850 mm to 2850 mm
- Adjusting screws for height adjustment
- Wear-free, electronic measuring system DMS
- Sensing rollers 50mm
- Prepared for weighing device
- Compact electric / switchbox, prepared for upgrade
- Drive-over axle load 4,0 to
- Brake force 8 kN
- Already equipped with a drive-off assistance
- Manual / Automatic mode
- Delayed switch on, start-up monitoring,slip switch-off and switch-off after exiting the test bed
- Testing program for electronic parking brakes
- Lockable main switch and emergency stop-switch
- Suspension tester Boge system,hot-dip galvanized bottom group
- test plates hot-dip galvanized, test width 890 - 2210mm
- Drive-over axle load 4,0 to (option (12 to), testable axle load 2,6 to
Versions
- Hot-dip galvanised roller set and suspension tester
- Roller set mit 203 mm rollers with welded surface
- Electrical / switch box with motor protection, control electronics, lockable main switch, emergency stop-switch
- 12 m pre-wired between bottom groups and e-box
Options
- Foundation frame
- Permanent formwork
- Plastic-coated rollers
- Pneumatic lowering/ lifting device
- Roller set raising
- Side slip tester
- Manually reversible rotation and measuring direction
- Automatically four wheel recognition (patented)
- EDOS (Easy drive out system - patented)
- Roller cover plate
- Remote control
- Digital display LED
- Pedal force meter
- Weighing device
- PC connection
- PC software Display Office NxT
Request for quotation
Technical data
| Drive over load | 6,000 kg |
| Brake force | 8 kN (optional 12,5 kN) |
| Testing speed | 5 km/h |
| Drive power of motors | 2 x 4,0 kW (optional 2x5,5 kW) |
| Roller diameter | 203 mm |
| Track width | 850 - 2,850 mm |
| Test load | at 50% braking 3,2 t (option 5 t) |
| Fuse | 3 x 25 A träge ( 4 kW Motoren ) <br/>3 x 32 A träge ( 5.5 kW Motoren ) |
| Power supply | 3x 400V |
| Roller set (W x L x H) | 2,970 x 680 x 250 mm |
| Suspension tester (W x L x H) | 2,320 x 680 x 280 mm |
Suspension tester Testmaster TL 60
| Drive over load | 6,000 kg |
| Drive power of motors | 2 x 1.2 kW |
| Test load | 2.6 t |
| Fuse | 3 x 20 A træg |
| Power supply | 3 x 400 V, N, PE 50 Hz |
| Display (W x H x D) | 810x670x70 mm |
| Roller set (W x L x H) | 2,925x680x240 mm |
| Suspension tester (W x L x H) | 2,320x800x280 mm |